The TI500E digital indicator
is a general purpose, industrial grade weight indicator. The
display is a LED .6" tall and is enclosed in a NEMA 12
approved ABS enclosure.
- Full Scale Input Signal: 30mV, including
dead load
- Minimum Sensitivity (non H-44): 0.4micro
volt / grad
- Minimum Sensitivity (H-44): 1.0 micro
volt / grad
- Input Impedence: 30Mohms, typical
- Internal Resolution: approximately 260,000
counts
- Display Resolution: 50,000 display division
max
- Measurement Rate: 10 Measures/sec nominal
- System Linearity: within .02% FS
- Calibration Method: software calibration
with long term storage in
- EEPROM
- Excitation Voltage: +10VDC, 4x350 ohm
load cells
- Digital Specifications:
- Microcomputer: Intel 80C32
- Program Memory: 32K x 8
- EEPROM: 64K x 16
- Digital Filtering: software selectable
- Serial Communications:
- Serial Port: 1200, 2400, 4800, 9600;
8n1, 7o1, 7e1, 7n2
- Operator Interface:
- Display: .056", 7 segment LED, 6
digit
- Additional Symbols: net, gross, tare,
lb, kg, zero
- Keyboard: 5 key flat membrane panel
- AC Adapter: 12VDC @ 500mA
- DC Power Consumption: 200mA + 30mA/350ohm
loadcell
- Operating Temperature: -10 deg C to +40
deg C
- Storage Temperature: -25 deg C to +70
deg C
- Overall Dimensions: 3.2"x6.8"x2.3"
Massload has developed software to work
with this indicator. Connect this indicator to your computer
and save your data. Visit our software support page to dowload
a free trial.
Contact for pricing: contactme@massload.com
Download the
TI-500e User Manual in .pdf format. (1.9mb)
|