Home | About Us | Become a Massload Dealer | Legal Privacy | Site Map  
 

Canadian Manufacturer of Quality Weighing Systems
301-47th Street East Saskatoon, SK S7K 5H2
Toll Free North America 1-800-667-3825
Intnl. 1-306-242-2020 Fax. 1-306-931-1991
E-mail: contactme@massload.com
 
Weigh In Motion
Crane Scales
Wireless Weighing
Truck Scales
Load Cells
Weighing Solutions
Computer Scales and Sensor Interface
Axle and Wheelweighers
Printers & Readouts
Government Applications
New Products
 
 

 

TI-1000 Stainless Steel Readout
with Cattle Motion Program

The TI-1000 is a general purpose low cost digital indicator with a NEMA 4x stainless steel enclosure for use in washdown environments. It comes with an oversize (1") LCD screen for easy readout of up to 5,000 display divisions, and supplies enough current for up to 4-350W load cells. The primary and secondary displayed units may be altered to fit the required application. All setup parameters may be entered via the front panel keys, including calibration.

The TI-1000 uses full duplex RS-232 serial format for communication with many types of attached support equipment. The unit can transmit data on demand, or continuously in a popular data protocol to match a wide variety of printers, remote displays, or personal computers. Wiring diagrams to connect extra equipment will be found on page 2 of this manual.

The setup parameters are altered through the Setup menu. A graphical road map of the Setup menu is found on page 3 of the manual. The Configuration section of the manual, found on page 2, explains how to enter the Setup menu. In this mode, the five front panel keys become directional navigators to maneuver and save settings.

Price:

Contact for pricing: contactme@massload.com
ANALOG SPECIFICATIONS
Full Scale Input Signal

Input Impedance

Internal Resolution

Display Resolution

Measurement Rate

System Linearity

Calibration Method


Excitation Voltage

RFI Protection

30V, including dead load

30MW , typical

Approximately 100,000 counts

5,000 dd

10 Meas/sec

Within 0.02% if FS

Software Calibration, with long term storage in EERPROM

+5VDC, 4 x 350W load cells

Signal and excitation lines protected by LC Low Pass Filter
DIGITAL SPECIFICATION

Microcomputer

 

 

 

Digital Filtering

Intel 80C32

Program Memory:

SCRAM:

EEPROM:

Software selectable

 .

32K x 8, external to m C

8K x 8, external to m C

64 x 16, external to m C
SERIAL COMMUNICATION
Printer Port

Full duplex at 1200, 2400, 4800, or 9600 Baud. Data bits and parity selectable
OPERATOR INTERFACE  
Display

Additional Symbols

Keyboard

1" (25.4mm) 7-segment, Liquid Crystal, 4½ Digit

Net, Gross, kg, neg weight

5-key flat membrane panel
POWER
AC Adapter

Power Consumption

12 VDC @ 800mA

110mA, with 4 x 350W load Cells
Operation Manual (11.8mb, .pfd format)

Dependable Load Cells
Electronic weighing scales
Digital Weighing Scales Provide Unfailing Accuracy & Reliability
Get Accuracy & Reliability With A Hanging Scale
Weighbridges
Industrial weigh scale
Digital Hanging Scale
High Quality Truck Scales
High-Quality Digital Industrial Scales
Electronic Weighing Scale With Digital Weight Indicators
 

 

oad cells, Digital weighing scales, Industrial weighing scale, Digital hanging scales