|
If you need to move your weigh in motion system around, this is the type of system for you. Massload provides an excellent portable solution for weigh in motion.
The weight sensors we suggest for a portable system are our very successful line of Ultra Slim Weighpads. Lightweight, robust, and low profile, these pads can be laid on any flat, hard, and level surface, connected to the computer, and within minutes, your system is ready to go.
Ask about our new 1 meter wide ultraslims
Our customers have asked for wider pads to make weighing easier
Click here to visit the Ultra Slim Weighpad webpage.
download
ultraslim brochure
download
portable wim brochure
For best accuracy, it is recommended that the vehicle is level with the weighpad. For this, we offer interlocking leveling track. The length of track is dependent on the length of vehicle you are weighing. The vehicle should be completely on the leveling track before any axle crosses the weighpads, and should remain on the leveling track until all axles have passed over the weighpads.
This track comes in compact and lightweight 36" x 24" (20lbs / piece) pieces. Handles are machined into the pad that make it easy to carry and assemble.
|
Roll Up Levelling Mats
Our roll up levelling mats makes moving and setting up as easy as 1-2-3.
Designed to work with Ultraslim Weigh pads
Great for portable weighing in motion and static applications
more... |
Cabling for a portable system consists of 1 Y-cable. There is an industry standard, water tight amphenol connector on each of the Y - ends that connect to the weighpads. On the other end is a 9 pin D connector that connects to the weigh in motion interface card. The length of cable can be up to 300 feet.
Click the picture below for a wiring schematic.
Direct interface from Weighing in Motion scale to usb port of computer
Facts you should know
- Samples sensor at 16,000 times a second - competition samples at 550 per second
- If used in static weighing application (.002% resolution )
- Unlimited linearity adjustment
- No external power supply needed
Fully rated USB 1.1 computer interface - use weigh in motion software with your laptop! Forget the full sized desktop.
16 bit resolution
Connect up to 8 devices to one computer
Can power twelve 300 ohm load cells
Backwards compatible with LCIC card
Small, standalone package, easy to wire to any scale
Calibration is stored on the device, not the computer, just plug it in and go.
Easy to use, windows based calibration utility and library.
Drivers for Win98, 2000, XP, Linux and OS X
Click here to goto the weigh in motion software page.
- 12VDC to 110VAC inverter to use power from a cigarette car lighter.
- Custom made carrying cases to keep all your weigh in motion components together and safe.
- Printers
- Wireless networking components.
- Pricing and Quotations
For pricing and quotations, please e-mail: contactme@massload.com, or call our toll free line: 1-800-667-3825.
|
